rev.2.00, feb.18.2005, page 1 of 5 hd74LS152 1-of-8 data selector / multiplexer rej03d0438?0200 rev.2.00 feb.18.2005 this data selector / multiplexer contains full-on-chip bina ry decoding to select the desired data source. the hd74LS152 selects one-of-eight data sources. features ? ordering information part name package type package code (previous code) package abbreviation taping abbreviation (quantity) hd74LS152fpel sop-14 pin (jeita) prsp0014df-b (fp-14dav) fp el (2,000 pcs/reel) note: please consult the sales office for the above package availability. pin arrangement (top view) gnd 1 2 3 4 5 6 7 14 8 9 10 11 12 13 4 3 2 1 c 0 w w v cc 5 d 4 6 d 6 7 d 7 b d 5 a a d 2 d 1 d 3 d 0 c b data inputs data select data inputs outputs function table select inputs output select inputs output c b a w c b a w l l l d 0 h l l d 4 l l h d 1 h l h d 5 l h l d 2 h h l d 6 l h h d 3 h h h d 7 notes: d 0 to d 7 ; the level of the d respective input h; high level l; low level
hd74LS152 rev.2.00, feb.18.2005, page 2 of 5 block diagram output w data select (binary) data inputs d 1 d 0 d 2 d 3 d 4 d 5 d 6 d 7 a b c absolute maximum ratings item symbol ratings unit supply voltage v cc 7 v input voltage v in 7 v power dissipation p t 400 mw storage temperature tstg ?65 to +150 c note: voltage value, unless otherwise noted, are with respect to network ground terminal. recommended operating conditions item symbol min typ max unit supply voltage v cc 4.75 5.00 5.25 v i oh ? ? ?400 a output current i ol ? ? 8 ma operating temperature topr ?20 25 75 c
hd74LS152 rev.2.00, feb.18.2005, page 3 of 5 electrical characteristics (ta = ?20 to +75 c) item symbol min. typ.* max. unit condition v ih 2.0 ? ? v input voltage v il ? ? 0.8 v v oh 2.7 ? ? v v cc = 4.75 v, v ih = 2 v, v il = 0.8 v, i oh = ?400 a ? ? 0.4 i ol = 4 ma output voltage v ol ? ? 0.5 v i ol = 8 ma v cc = 4.75 v, v ih = 2 v, v il = 0.8 v i ih ? ? 20 a v cc = 5.25 v, v i = 2.7 v i il ? ? ?0.4 ma v cc = 5.25 v, v i = 0.4 v input current i i ? ? 0.1 ma v cc = 5.25 v, v i = 7 v short-circuit output current i os ?20 ? ?100 ma v cc = 5.25 v supply current** i cc ? 6.0 10 ma v cc = 5.25 v input clamp voltage v ik ? ? ?1.5 v v cc = 4.75 v, i in = ?18 ma notes: * v cc = 5 v, ta = 25c ** i cc is measured with all outputs open and all inputs at 4.5 v. switching characteristics (v cc = 5 v, ta = 25c) item symbol inputs outputs min. typ. max. unit condition t plh ? 14 23 t phl a, b, c w ? 20 32 t plh ? 13 21 propagation delay time t phl data w ? 12 20 ns c l = 15 pf, r l = 2 k ?
hd74LS152 rev.2.00, feb.18.2005, page 4 of 5 testing method test circuit 4.5v w output v cc r l c l input p.g. z out = 50? see function table d 0 d 1 d 2 d 3 d 4 d 5 d 6 d 7 a b c notes: 1. c l includes probe and jig capacitance. 2. all diodes are 1s2074(h). waveform t plh t phl v oh v ol 0 v 3 v v oh v ol t phl t plh 10% 90% 1.3 v 1.3 v 1.3 v 1.3 v 1.3 v 1.3 v 10% 90% input in phase output out of phase output t tlh t thl note: input pulse; t tlh 15 ns, t thl 6 ns, prr = 1 mhz, duty cycle 50%
hd74LS152 rev.2.00, feb.18.2005, page 5 of 5 package dimensions 1.42 0.15 1.27 7.50 8.00 0.40 0.34 p a 1 10.5 fp-14dav renesas code jeita package code previous code max nom min dimension in millimeters symbol reference 2.20 0.90 0.70 0.50 5.50 0.20 0.10 0.00 0.46 0.25 0.20 0.15 7.80 8 0 0.12 1.15 10.06 0.23g mass[typ.] 1 e 1 1 2 l z h y x c b a e d b c e l a p-sop14-5.5x10.06-1.27 prsp0014df-b index mark e 1 *2 *1 7 14 8 f *3 p mx y d e h z b a p terminal cross section ( ni/pd/au plating ) b c detail f 1 1 l l a note) 1. dimensions" *1 (nom)"and" *2" do not include mold flash. 2. dimension" *3"does not include trim offset. e
keep safety first in your circuit designs! 1. renesas technology corp. puts the maximum effort into making semiconductor products better and more reliable, but there is al ways the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas technology corp. or a third party. 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating i n the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents in formation on products at the time of publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvements or other reasons. it is therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distributor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas technology corp. semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, an d algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under cir cumstances in which human life is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corp. is necessary to reprint or reproduce in whole or in part these materia ls. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a lice nse from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corp. for further details on these materials or the products contained therein. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to "http://www.renesas.com/en/network" for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, 1 canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2730-6071 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology (shanghai) co., ltd. unit2607 ruijing building, no.205 maoming road (s), shanghai 200020, china tel: <86> (21) 6472-1001, fax: <86> (21) 6415-2952 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas sales offices ? 2005. renesas technology corp., all rights reserved. printed in japan. colophon .2.0
|
